Description: Rear HP600 HEL Track Brake Pads Citroen ZX 2.0i (07/92 - 06/97) Rear Discs Pad Type HP600 Location Rear Product Code HP600-015R Manufacturer Citroen Model ZX Chassis Engine 2.0i Notes Rear Discs Year 07/92 - 06/97 Description Welcome to the HEL PRO range of automotive brake pads. With an impressive operating temperature window of up to 800°C, these pads will handle the most serious braking conditions and we develop these exclusively for racing or track day use. Both our HP600 and HP666 brake pads give great consistency, longevity and friction at both hot and cold temperatures. HP666 The HP666 has a ceramic kevlar compound that has a great initial bite, excellent control and pedal feel. It delivers a powerful friction coefficient of 0.42–0.57µ over a temperature range of 0–800°C. This pad sacrifices a little brake noise and rotor dust to deliver the ultimate in stopping power. This is the brake pad to choose when milliseconds make the difference between you winning and losing. We would recommend a high carbon grooved disc to compliment this pad. With a similar compound to the Feredo DS3000, it transfers a small layer of material onto the disc and if you have a softer disc you might get an excessive build up of material transfer. This will not affect performance, only aesthetics. The temperature range of this pad is 0–800°C, with the optimum working temperature being 666°C. HP600 The HP600 also has a ceramic supermetal compound that has a milder initial bite than the HP666, but still retaining the same excellent control and pedal feel with a powerful friction coefficient of 0.35–0.48µ over a temperature range of 0–600°C. This is a great all-round track day pad that will outperform a lot of more expensive pads. Similar in compound to the Feredo DS2500, we have had very good results combining this pad with a plain disc such as Pagid. Eliminating Brake Fade When brake pads run at high temperatures, a layer of gas can sometimes be created between the pad and brake disc. This can make the driver feel like they have lost braking power as the brake pedal feels the same but the car will not stop as quickly, this is called brake fade. To remedy this, a slot is cut into all HEL Performance pads to offer the gasses a route to escape. Bedding In HEL Performance brake pads are put through a heat curing treatment in the manufacturing process. This process removes unwanted gasses from the materials in advance, reducing the gasses that can cause fade within the brake pad. Because of this treatment, our brake pads only need light bedding in to match the padding to the disc. Brake pads should be bedded in until up to mid range working temperature then allowed to cool properly. This will also help to removes any gasses that are still within the pad. Not following this process may cause problems leading to a decrease in optimum performance. International Buyers (outside United Kingdom) Import duties, taxes and any other charges are NOT included in the item price or shipping cost (unless the option is chosen to pay import duties through ebay directly). These charges are the buyer's sole responsibility. Please check with your country's customs office to determine what your costs will be before buying.
Price: 85 GBP
Location: Dawlish
End Time: 2024-02-25T18:23:16.000Z
Shipping Cost: 18.92 GBP
Product Images
Item Specifics
Return postage will be paid by: Buyer
Returns Accepted: Returns Accepted
After receiving the item, your buyer should cancel the purchase within: 30 days
Return policy details:
Brand: HEL Performance
Country/Region of Manufacture: United Kingdom
Manufacturer Part Number: HP600-015R
Placement on Vehicle: Rear,Left,Right
Performance Part: Yes
