Sapele Pommele Figured Quilted wood veneer 15" x 65" raw no backing 1/42" thick

Description: Sapele Pommele Figured Quilted Waterfall wood veneer 15" x 65" x 1/42" overall thickness with no backing (raw). "A" grade quality. All sheets are sequential (same bundle). One piece per price. Veneer will need some flattening. Color is more deep maroonish than brownish. Most veneers will require some flattening. This has to ship flat, so may be a little more expensive than a rolled veneer to ship. First three photos are finished samples that show what the product will likely look like when finish is applied. Second photo most accurate color. Clear semi gloss was used here. Some other photos were wet with water for same purpose. You get unfinished veneer. Trust the experience, knowledge, and reputation that has served the wood industry since 1995. Visit My eBay Store: JSO Wood Products Other sizes and backers may be available. Contact seller. About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.

Price: 60 USD

Location: Louisville, Kentucky

End Time: 2023-09-26T20:38:00.000Z

Shipping Cost: N/A USD