Standard Coconut Shell Block Carbon & Polypropylene Sediment 5 Micron 2.5"x 10"

Description: Standard Whole House Melt-blown Four Layers Filtration Polypropylene 10 Micron Sediment Filter 20" x 2.5" Fits 20" x 2.5" Housings. Compatible with FPMB5-20, FPMB520, SDC-25-2005/4, VX05-20 25 Pack Product Description Industry Standard 20-inch by 2.5-inch 10 Micron Sediment Filter - Used for effectively removing most sediments and any other undissolved particles from water. As the first line of defense in the filtration system, protect your water using appliances and plumbing structure from, improve water quality and taste. This is a filter for a Whole House Water Filtration Unit or any type of Water Filtration Unit with a 20 inch housing and WELL-MATCHED Models of Cartridges: Hydronix SDC-25-2005/4, iSpring FP25X25, Aqua-Pure AP110-2C, Cuno CFS124-C20, Tire1 P5-20, Everpure DEV910912, Neo-Pure PS-27200-05, MBG-25200-05 and SDG-25-2005, EVE155016-43 and EVEDEV910912, Hydrocure 31052000, SDF-25-2005 Product Lifetime: Replace two or three times a year - depending on your water quality and application. Suggested change out when original water pressure dropped by 25 PSI Four separate gradient density layers enhance cartridge performance, higher dirt-holding capacity than the similar sized sediment water filter. This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 20 inches x 2.5 inches (48.8 cm x 6.35 cm) WELL-FIT FOLLOWING HOUSINGS: iSpring WCB32C, WCB32O and RCB3P, Geekpure 122-20, KleenWater A-KWHT2520-KW2520BR-Bracket-Wrench, LifeSource Water System 43208-530, BA-FH2025-CLR3 Polypropylene Multi-layer Gradient Filtration Cartridge The 20" x 2.5" Sediment Filter is often the first filter installed in the Whole House Water Filter circuit. It is often the first point of contact between your water supply and your home and is used as a pre-filtration unit before the water continues to reverse osmosis and activated carbon filters. It catches unwanted particles, including sand, dirt, silt, rust, and other fine particles as they attempt to enter your house’s water system. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. These filters are made of fine-melted polypropylene that are blown and spun into cylinder-like form. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, as well as household water appliances like boilers, ice-makers, and many more, to perform better for longer periods of time. A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size is recommended in the first stage of installation to prevent the clogging of the next stage of filters. The main difference between a regular Sediment 10"x 2.5" Filter and a 20"x 2.5" Sediment Filter is the size, a 20"x 2.5" Sediment Filter is usually used for filtering the water on the entrance into the house, appropriately called whole house filter. It is able to filter a larger volume of water than a regular filter with its larger surface area, size, and radius Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. ... Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person's clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Extraordinary Dirt-Holding Capacity Superior contaminant holding capacity and superior flow rate compared to similar size sediment water filter cartridges. These cartridges will reduce sediment particles as small as 10 microns without adding taste, odor, or color to your water. Such filter cartridges are ideal for all residential, rural, commercial, industrial, and municipal applications. Specifications: Filter Type Fine Melted Polypropylene Flow Rate 5 GPM Height IN/CM 20 IN/48.8 CM Operating Temperature 40°F (4.4°C) - 125°F (51.7°C) Outer Diameter IN/CM 2.5 IN/6.35 CM Operating Pressure 20 PSI (1.4 bar) - 125 PSI (8.6 bar) Inner Diameter IN/CM 1.125 IN/2.5 CM Product Lifetime Replace two or three times a year - depending on your water quality Micron Rating 10 MICRON Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation) 1 Standard Coconut Shell Block Carbon & 1 Four Layers of Filtration Polypropylene Sediment 5 Micron 2.5"x 10" Water Filter Cartridges Universal replacement for Reverse Osmosis & Standard 10” Housing Product Description SET OF 1 Standard Coconut Shell Block Carbon & 1 Four Layers of Filtration Polypropylene Sediment 5 Micron 2.5"x 10" Water Filter Cartridges Universal replacements for Reverse Osmosis & Standard 10” Housing - Used for effectively removing most sediments from water and keeps water fresh by reducing and removing iron, manganese, chlorine, hydrogen sulfide, herbicides, pesticides, and other industrial chemicals SEDIMENT FILTERS are for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with a 10 inch housing and WELL-MATCHED Models of Cartridges: Dupont PFC5002,DuPont WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14, RS14-SD, RS14-DS and RS14-SS, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05 BLOCK CARBONE FILTERS are universal Replacement for all 10" Standard Water Filter Housing and WELL-MATCHED Models of Cartridges: Watts Premier MAXETW-975, DuPont WFPFC8002, SCWH-5, Tier1 EP5_10, Whirlpool WHA2BF5, Water Filter Tree WWC105, GE FXWTC, WFD WF-CB105, Culligan D-10, EcoPure EPW2C, Aquaboon CTO, Purenex, Cornelius COR10B1, Neo-Pure CTO1-2510, COR10B5, KleenWater KWGE25RG, WFDWC30001, Omnipure OMB934-5M, WFPFC9001, Everpure CG5-10, MatriKX 32-250-10-GREEN, DEV9108-15, iSpring FC15 PRODUCT LIFETIME - Replace two or three times a year - depending on your water quality. These filters are wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Sediment Filter Dimensions: 10 inches x 2.5 inches (24.4 cm x 6.35 cm), Block Carbon Filter Dimensions: 9.875 inches x 2.5 inches (25.7 cm x 6.35 cm) WELL-FIT FOLLOWING HOUSINGS AND REVERS OSMOSIS WATER FILTER SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2; iSpring RCC7AK, Global Water RO-505, RO5DX, APEC ROES-50-A, SimPure RPWROKSN075HDB Polypropylene Multi-layer Gradient Filtration Cartridge A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. When people say water filter, they most frequently mean a carbon filter of some variety, because since the Egyptians discovered that storing water in charcoal made it stay fresher and taste better, carbon has been a standard feature in water treatment. Its centuries of popularity attest to its effectiveness. Outer Zone Mid Zone Inner Zone Innermost Zone Block Activated Coconut Shell Carbon Cartridge The Standard Activated Carbon Block filters are made of fine coconut shell carbon. They remove odors, undesirable colors, and unpleasant tastes of many organic compounds. These filters also are effective in removing chemicals like iron, manganese, chlorine, and hydrogen sulfide from your water to name a few. By removing these unwanted byproducts, you can rest assured that you will have access to fresh and clean water. Since these filters are made of a finely packed carbon (forming a cylinder block), they offer a much finer filtration of suspended particles and dirt. Chlorine removal is what carbon is best at, and nothing else equals carbon's ability to remove chlorine. What is Activated Carbon Block? There are many types of carbon. Most filter carbon is manufactured from coal, but other substances like wood and nut shells are also used. Coconut shell carbon is becoming popular not only because it is made from a renewable resource but also because it produces very good tasting water and is particularly good at trihalomethane removal. Besides the physical absorption that the Activated Carbon Block filter can provide, it also filters the water via a chemical process. The Activated Carbon Block filter is positively charged, thus it is able to attract negatively charged particles such as: chlorine, benzine, and other volatile organic compounds, and prevent them from flowing out into your glass. Carbon is well known for its unique absorbing ability; just a pound of carbon is able to provide up 125 acres of filtering surface area. Multi-Sage of Filtration These universal filters are 2.5 x 10-inch. Fit most standard under-sink Reverse Osmosis water filtration units or any type of water filtration units with standard 10-inch housing. Reverse Osmosis System Whole House Water System Under Counter-top Water Filter System Counter-top Water Filter System Sediment water filter cartridge usually used as first stage in Reverse Osmosis System Activated carbon block filters usually use in Revers Osmosis Systems before and after water passes through the membrane. The carbon pre-filter removes free chlorine, which can deteriorate thin film composite (TFC) membranes over time. Post-filters are generally used to remove tastes and odors that may be picked up from the storage tank bladder Sediment water filter cartridge usually used as a pre-filter in the Whole House Water System to optimize performers and life span of the carbon or GAC filters. Activated Carbon Block filters usually deliver clean chlorine and chloramine-free water for all your household uses, including drinking, cooking, showering and bathing, and cleaning. Long life filters making them relatively good solution to purify your water. Sediment water filter cartridge usually used as a pre-filter in the Under Counter-top Water Filter System to optimize performers and life span of the carbon or GAC filters. Activated Carbon Block filters usually deliver clean chlorine and chloramine-free water for drinking and cooking directly to the faucet. Long life filters making them relatively good solution to purify your water. Sediment water filter cartridge usually used as a pre-filter in the Counter-top Water Filter System to optimize performers and life span of the carbon or GAC filters. Activated Carbon Block filters usually deliver clean chlorine and chloramine-free water for drinking and cooking directly to the faucet. Long life filters making them relatively good solution to purify your water. Extraordinary Dirt-Holding Capacity Superior contaminant holding capacity and superior flow rate compared to similar size sediment water filter cartridges. These cartridges will reduce sediment particles as small as 5 microns without adding taste, odor, or color to your water. Such filter cartridges are ideal for all residential, rural, commercial, industrial, and municipal applications. Specifications: Filter Type Fine Melted Polypropylene Filter Type Coconut Shell Activated Carbon Height IN/CM 10 IN/24.4 CM Height IN/CM 9.875 IN/24.4 CM Outer Diameter IN/CM 2.5 IN/6.35 CM Outer Diameter IN/CM 2.5 IN/6.35 CM Inner Diameter IN/CM 1.125 IN/2.5 CM Inner Diameter IN/CM 1.125 IN/2.5 CM Micron Rating 5 MICRON Micron Rating 5 MICRON Flow Rate 5 GPM Operating Temperature 40°F (4.4°C) - 125°F (51.7°C Operating Pressure 20 PSI (1.4 bar) - 125 PSI (8.6 bar) Product Lifetime Replace two or three times a year - depending on your water quality Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)

Price: 19.99 USD

Location: Brooklyn, New York

End Time: 2024-01-20T21:49:41.000Z

Shipping Cost: 0 USD