Star Trek Art Asylum Phaser, LOT P1, Metal Parts, NEW LOCK-PLATE, TRIGGER

Description: In general: all parts are shipped with the machine finish as shown in the LISTING PHOTOS. Final finishing is by the Buyer (prop maker) and may include whatever; polishing, graining, distressing, acid washes, electroplating, and other treatments as selected and executed by the Buyer. Most parts will have some cosmetic blemishes that the Buyer may/may-not want to remove or enhance. Thank You. Star Trek Art Asylum Phaser Metal, Parts LOT P1, fits AA/DS and Everything Else !Now Includes a Mirror Polished Lock-Plate and Machined Trigger !!THIS MIX OF P1 PARTS REPRESENTS ONE OF OUR MOST POPULAR ORDER COMBO'S Save ON PACKAGES! This package costs about 20% less than buying all the parts seperately in my eBay store. The REDUCED packing, handling, and postage COST SAVES YOU AN ADDITIONAL $18 for this SELECT-PARTS-PACKAGE !! Compare to P1 parts packages at $90-$100.00 on OTHER retail sites on ebay.No Cast Prop-Metal parts in this listing (aka...R98 Pewter of ; 98% Tin & Bismuth & Copper).All parts are machined aluminum or are otherwise, stamped aluminum where indicated, brass parts are real solid brass.Parts are machined with a pretty finish; drop-in ready, or polish them some more! (except for the lock-plate, that is as mirror a polished as you can get AND, SHIPS WITH PROTECTIVE FILM ON POLISHED SURFACE TO PREVENT SCRATCHES DURING INSTALLATION).Package Includes: one of each as listed below. Multiples shown in photographs so you can see multiple views but you get just one of each.Modification of the toy Phaser or or other prop/12mm LSR-prop, such as fiberglass or resin, is most likely required; see listing instructional pictures. Watch YouTube links as below.Phaser Shell & Display: are for reference and not included.Fits AA/DS and, all similar P-1 & P2 shells. You are the prop builder !!There are other Metal-Package-Deals listed for: (a) Just P1's, (b) Just Shanko 12mm LSR Rifles, (c) Other P2 Hero Packages, (d) P2 Mid-Grade Packages, (e) and lots more... check all my listings visit my eBay Store.The 10-turn engraved dial features real-engraved-numbers & Lines, not printed or anodized-on!CLICK HERE FOR ALL PHASER METAL KITS To review the specific dimensions and specifications for each part CLICK ON the “CLICK & JUMP” below. Use the back-button to return-here to this parts package page OR, better yet save a parts package in your Cart for a checkout later on. The package includes ONE EACH OF THE items in the main-listing-photo and, MOST specifically as listed below: VIEW LOT P1 SPECIFICATIONS HERE: METAL TRIGGER KIT, MACHINED ALUMINUM, FOR PROP OR LASER-PROP USE (CLICK FOR TRIGGER KIT) ONE MIRROR POLISHED ALUMINUM LOCK-PLATE (CLICK & JUMP TO NEW LOCK-PLATE) ONE REAR FINS (CLICK & JUMP) ONE SOLID BRASS P1 RELEASE PIN (CLICK FOR BRASS PIN) ONE P1 CRISPY PRECISION STAMPED IN 32 GAUGE ALUMINUM (CLICK & JUMP) ONE P1 PRECISION MACHINED EMITTER TUBE (CLICK FOR BRASS EMITTER TUBE) ONE P1 TRIGGER BUTTON (CLICK FOR P1 TRIGGER BUTTON) ONE COIN EDGE THUMB-WHEEL, MACHINED, NOT A CAST PART. (CLICK FOR WHEEL)CLICK; EXPLODED PHASER 12mm LSR SLIDESHOW; YOUTUBE VIDEO CLICK FOR WAND PHASER MODIFICATION YOUTUBECLICK; AA/DS PHASER-12mm LSR HOW-TO; YOUTUBE VIDEO CLICK; TOS-PHASER FIN FINISHING; YOUTUBE VIDEO CLICK; TOS-PHASER SIDE-RAIL FINISHING; YOUTUBE VIDEO METAL PARTS; Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. Use dish-washing detergent such as "Dawn" or "Palmolive" to insure a clean part. THE RESIDUE/OIL IS NOT VISIBLE NOR CAN YOU FEEL-IT, BUT IT IS THERE SO CLEAN YOUR PARTS. Some Star Trek Prop History For Inquiring Minds:Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad. (all these are therefore 2nd hand stories) Mr. Greg Jein was a very well known Star Trek TOS prop collector and authority (born October 31, 1945 in Los Angeles, USA; died May 22, 2022 in Los Angeles). He had personal friendships with all the listed Star Trek TOS production prop craftsmen (Bob Stone, James Rugg, Richard Heimer, John Dwyer, and Mr. Ruck). Greg was an acquaintance of mine (Jon-Paul L), and generously took the time to meet me in California on several occasions, beginning in 2018 right through 2021. He shall be missed.Mr. Jein was a filming model designer who, starting in the 1970s’, created miniatures for use in the special effects portions of many films and television series. Mr. Jein was nominated for an Academy Award for Best Visual Effects for “Close Encounters of the Third Kind” (1977) and, nominated for an Outstanding Special Visual Effects Emmy for “Angels in America” (1979).In the 1970s’ Greg worked onTV productions such as “Wonder Woman”, and “The UFO Incident”. Jein then went on to work on Spielberg's film “1941”, where he and his team constructed a number of models including a twelve-foot model of the Ferris wheel that's dislodged from its mount and rolls down the pier and into the water. For their work on “1941” Jein, William A. Fraker and A. D. Flowers were again nominated for an Academy Award for Best Visual Effects.Then in the 1980’s Greg Jein was invited to work on “Star Trek: The Motion Picture” building planetary models for Spock's spacewalk scene and the interior of the V'Ger craft. Jein continued his association with Star Trek Films, building alien weapons for: “Star Trek V The Final Frontier”, Starfleet helmets for the assassination scene in “Star Trek VI The Undiscovered Country”. In 1986 for “Star Trek The Next Generation” Jein and a team at Industrial Light & Magic (ALM) built the original six-foot model of the USS Enterprise (NCC-1701-D), the Ferengi Marauder starship and, the Klingon Vor'cha.BACK TO STAR TREK TOS 1966 THRU 1969Mr. Bob Stone was Star Trek's machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend Robert Archer (VP of Budgeting for the show) in getting a little leeway on the $ so he could do the best possible job. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines.Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that).Robert Archer and Bob Stone worked closely together so when the show was canceled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Richard Heimer made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. James Ruggs (b. 1919) was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was canceled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Mr. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James.In closing a nod to Mr. Ruck, a prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking about when it comes to repairs and hand props flying apart.The jonpaultrek2012™® company Supports the right to free expression and the value of the copyright. The purpose of the copyright is to encourage writers, filmmakers and artists to produce the creative works that enrich our culture. All scanning, uploading, and distribution of the content of this web posting without permission is theft of the author's Intellectual Property. if you would like permission to use the material from this website (Other than for the intended review purposes) Please contact me for permission. All new products sold on this website are produced under license From: jonpaultrek2012™® LLC, Florida corporation, located in the United States of America.

Price: 80.08 USD

Location: Brooksville, Florida

End Time: 2024-10-18T01:46:25.000Z

Shipping Cost: 5.99 USD