STLINK-V3SET Emulator Modular In-circuit Debugger Programmer for STM8 and STM32-

Description: Description STLINK-V3SET Emulator Original Modular In-circuit Debugger and Programmer for STM8 and STM32 Description: The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board. The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. The STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART, and bridge interfaces (SPI, I2C, CAN, GPIOs) allowing for instance the programming of the target through the bootloader. The STLINK-V3SET can provide a second Virtual COM port interface allowing the host PC to communicate with the target microcontroller through another UART (called bridge UART). Bridge UART signals, including optional RTS and CTS, are available on adapter board only (MB1440). The second Virtual COM port activation is done through a reversible firmware update, which also disables the mass storage interface (used for drag-and-drop flash programming). The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board. Features: * Stand-alone probe with modular extensions * Self-powered through a USB connector (Micro-B) * USB 2.0 high-speed compatible interface * Direct firmware update support (DFU) * JTAG / serial wire debugging (SWD) specific features: 3 to 3.6 V application voltage support and 5 V tolerant inputs; Flat cables STDC14 to MIPI10 / STDC14 / MIPI20 (connectors with 1.27 mm pitch); JTAG communication support; SWD and serial wire viewer (SWV) communication support * SWIM specific features (only available with adapter board MB1440): 1.65 to 5.5 V application voltage support; SWIM header (2.54 mm pitch); SWIM low-speed and high-speed modes support * Virtual COM port (VCP) specific features: 3 to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs; VCP frequency up to 15 MHz; Available on STDC14 debug connector (not available on MIPI10) * Multi-path bridge USB to SPI/UART/I2C/CAN/GPIOs specific features: 3 to 3.6 V application voltage support and 5 V tolerant inputs; Signals available on adapter board only (MB1440) * Drag-and-drop flash programming of binary files * Two-color LEDs: communication, power Package Included: * 1 x Set of Debugger Programmer Payment Terms 1.We accept PayPal only. 2.All major credit cards are accepted through secure payment processor PayPal. 3.Payment must be received within 7 business days of auction closing. 4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms - For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding. Return Terms 1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund. 2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA. 3. We reserve the right to refuse any returns for objective reasons. Custom Duties & Taxes 1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility. 2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping. Feedback 1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. 2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.

Price: 63.2 USD

Location: Shenzhen

End Time: 2024-08-03T14:27:56.000Z

Shipping Cost: 3 USD