STLINK-V3SET Modular Debugger & Programmer for STM32/STM8 USB 2.0 Interface

Description: DESCRIPTION STLINK-V3SET, Modular In-Circuit Debugger And Programmer For STM32/STM8STLINK-V3SET Debugger/ProgrammerSuitable for STM8 / STM32 microcontrollers The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.Features At A GlanceStand-alone probe with modular extensionsSelf-powered through a Micro-B USB connector (does not provide power supply to the target application)USB 2.0 high-speed compatible interfaceDirect firmware update (DFU) support, to use with more future devicesSupports JTAG / SWD interfaces, 3V~3.6V application voltage support and 5 V tolerant inputsSupports SWIM interface, 1.65V~5.5V application voltage support, only available with adapter board MB1440Virtual COM port (VCP) specific features:3 V to 3.6 V application voltage support on the UART interface and 5 V tolerant inputsVCP frequency up to 15 MHzAvailable on STDC14 debug connector (not available on MIPI10)Drag-and-drop Flash programmingTwo color LEDs: communication, powerSoftware SupportHardware SupportAll STM32 MCUs With JTAG / SWD InterfaceAll STM8 MCUs With SWIM Interfacefor reference only, the STM32 and STM8 boards above are NOT includedJP4 and JP6 jumper caps must be connected to use the SWIM interfaceProduct Assembly DiagramSTLINK Series Selection GuideITEMV3MINIEV3SETV2JTAG/SWD APPLICATION VOLTAGE1.65V~3.6V①3V~3.6V1.65V~3.6V①SWIM APPLICATION VOLTAGEN/A1.65V~5.5V1.65V~5.5VSWV SUPPORTYES②DEBUG INTERFACEmultimulti③2LED INDICATORtwo colors④① ST-LINK/V2 and STLINK-V3MINIE support STM32 low-power devices.② Only available for STM32 at present.③ STLINK-V3SET features GPIO port besides the programming port.④ Two colors LED indicates both power and communication.What's On BoardMicro USB portPower LED indicatorCOM LED indicatorCOM LED is blinking RED: the first USB enumeration with the PC is taking place.COM LED is RED: communication between STLINK-V3SET and the PC is established (end of enumeration).COM LED is blinking GREEN/RED: data are being exchanged between the target and the PC.UART header (VCP)SWIM headerSWD header SWIM ON/OFFenabled when jumper cap is connectedCAN headerCAN ON/OFFenabled when jumper cap is connectedUART BridgeSPI/UART/I2C/CAN/GPIOs BridgeSPI BridgeJTAG20 headerSTDC14 headerProduct ShowOutline DimensionsResources & Services PACKAGE CONTENT Weight: 0.23 kgSTLINK-V3SET x1

Price: 80.98 USD

Location: 深圳

End Time: 2024-08-11T07:42:26.000Z

Shipping Cost: 0 USD