STM32F401 Development Board STM32F401CCU6 USB-C Original Blue Pill

Description: STM32F401 Development Board STM32F401CCU6 USB-C Original Blue Pill Brand New Condition 25MHz highs speed crystal and 32.768Khz 6PF low speed crystal Flash pad has been reserved to provide USBDisk and FATFFS routines Supports MicroPython Programming Supports Arduino Programming Dynamic efficiency line with BAM (batch acquisition mode) 1.7 V to 3.6 V power supply -40 °C to 85/105/125 °C temperature range Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 84 MHz, memory protection unit, 105 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions Memories Up to 256 Kbytes of Flash memory 512 bytes of OTP memory Up to 64 Kbytes of SRAM Clock, reset and supply management 1.7 V to 3.6 V application supply and I/Os POR, PDR, PVD and BOR 4-to-26 MHz crystal oscillator Internal 16 MHz factory-trimmed RC 32 kHz oscillator for RTC with calibration Internal 32 kHz RC with calibration Power consumption Run: 128 μA/MHz (peripheral off) Stop (Flash in Stop mode, fast wakeup time): 42 μA typ @ 25 °C;65 μA max @25 °C Stop (Flash in Deep power down mode, slow wakeup time): down to 10 μA typ@ 25 °C; 28 μA max @25 °C Standby: 2.4 μA @25 °C / 1.7 V without RTC; 12 μA @85 °C @1.7 V VBAT supply for RTC: 1 μA @25 °C 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support Up to 11 timers: up to six 16-bit, two 32-bit timers up to 84 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer Debug mode Serial wire debug (SWD) & JTAG interfaces Cortex®-M4 Embedded Trace Macrocell™ Up to 81 I/O ports with interrupt capability All IO ports 5 V tolerant Up to 78 fast I/Os up to 42 MHz Up to 11 communication interfaces Up to 3 × I2C interfaces (1Mbit/s, SMBus/PMBus) Up to 3 USARTs (2 x 10.5 Mbit/s, 1 x 5.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control) Up to 4 SPIs (up to 42 Mbits/s at fCPU= 84 MHz), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock SDIO interface Advanced connectivity USB 2.0 full-speed device/host/OTG controller with on-chip PHY CRC calculation unit 96-bit unique ID How to enter ISP Mode Method 1: In the power on state, press and hold the BOOT0 Key and reset Key, then release the reset key and release the BOOT0 Key after 0.5 seconds. Method 2: In the power off state press and hold the BOOT0 Key and release the BOOT0 key 0.5 seconds after power 0n. DFU mode: Connect the computer with the data cable. If you are not able to identify the problem you are able to heat the top of the chip to about 25 Celsius and then enter into the ISP mode. Serial Port Mode: Use USB to serial port to connect the PA9 and PA10 of the board. Jump cap version download: BOOT0 connect to high, BOOT1 connect to high, enter the serial port to download or DFU download, the software is the same as above. Package 1 x STM32F401CCU6 Module (Blue Pill) NOTE: *Always Read Directions Before Use Normal 0 false false false EN-US X-NONE X-NONE Visit IC-Forever eBay Store for more variety of goods and amazing treasures, daily updates! Have a Wonderful Day and Thank You for your Business! IC-Forever eBay

Price: 10.25 USD

Location: Lumberton, New Jersey

End Time: 2024-08-16T17:33:23.000Z

Shipping Cost: 0 USD