Description: Professional grade rubber mold that will last for hundreds of pours, created from natural brick to reproduce the natural brick's finest detailsThese corners are 2-step corners, which do NOT require a corner plug.No release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds, urethane molds, and silicone moldsMade in the USA, both materials and laborMatching flat molds are available Rustic Brick is a rugged, rounded brick with an Old World look. The corner bricks created with this mold are approximately 9.5” long by 2”-2.25” wide, and 1"-1.25" thick at the long end. The short ends are approximately 3" long. These corner molds are 2-step corner molds, which do NOT require a corner plug. Pour the long side of the corner first, let the concrete partially set, then tilt it and pour the short end of the corner. Timing is everything. Rustic Brick pairs well with stucco and can also be mixed with stone for a highly Tuscan feel. Each mold makes approximately 2 linera feet, grouted. Stone Masters' rubber molds require no release agent and will last for hundreds of pours. Made in the USA, both materials and labor. Matching flat molds are available. Each mold measures approximately 24" long by 12" wide, by 2.25" thick. Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix: This is one suggestion for mixing the concrete for manufactured stone. There are many other instructions available online, including videos. BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing. If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc. A plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble. Cure in the molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.
Price: 132.95 USD
Location: Kansas, Oklahoma
End Time: 2024-07-28T16:57:16.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Stone Master Molds, LLC
Type: Brick Mold
Model: RB-C
MPN: RB-C
Country/Region of Manufacture: United States
