Di-Acro

TARAMPS - HD3000 2ohms 1 Channel + TS400x4 2ohms 4 channel Amplifier Car Audio

Description: Get ready to upgrade your car audio system with this powerful Taramp's HD3000.1 2ohms + TS400x4 2ohms amplifier. Made in Brazil, this mono channel amplifier boasts an impressive 3000W RMS power, perfect for delivering a premium audio experience. The Taramp's HD3000.1 is a reliable and high-quality car amplifier that is designed to provide an exceptional listening experience. With its advanced features and powerful sound, this amplifier is perfect for any car enthusiast who wants to upgrade their vehicle's audio system. So, whether you're looking to enhance your music listening experience or you want to enjoy your favorite movies in crystal-clear sound quality, the Taramp's HD3000.1 is the perfect choice for you. Technical specifications:HD3000 2ohms • Operation class: class d.It is the construction indication of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, it allows a small, efficient amplifier with reduced heating compared to other construction classes . • Number of channels: 01.Number of channels to use in your project, with this specific model you have the option of connecting only 1 channel. • Power @12.6v – 2 ohms: 3000watts rms.The power with a voltage of 12.6 volts is related to the operation of the vehicle/power source.• Power @12.6v – 4 ohms: 2025watts rms.The power with a voltage of 12.6 volts is related to the operation of the vehicle/power source.• Power @12.6v – 8 ohms: 1140w rms.The power with a voltage of 12.6 volts is related to the operation of the vehicle/power source. • Minimum output impedance: 2 ohms.Association with the speaker result, where, for example, we can connect two 4 ohm speakers or four 8 ohm speakers to the channel for this result. • Minimum output impedance: 4 ohms.Association with the speaker result, where, for example, we can connect two 8 ohm speakers or just one 4 ohm speaker to the channel for this result. • Minimum output impedance: 8 ohms.Association with the speaker result, where, for example, we can connect only an 8 ohm speaker to the channel for this result. • Minimum input sensitivity: 230mv.Lower voltage required for maximum results with the amplifier, that is, with low volume on the radio, we will achieve good results. • Frequency response: 10hz ~ 20kHz(-3db).With the frequency response it is possible to identify the application of the amplifier, so if the speaker or any other type of transducer you are using is understood within this response, it means that we can use that product in your project. • Variable crossover low pass (lpf): 80hz ~ full.Lpf or low pass filter (term in English) means low pass filter, that is, it allows everything that is below this reference to be reproduced and what is above this indication will not be used, a common use of this function is to reduce the presence of voice on subwoofers. • Variable high pass crossover (hpf): 10hz ~ 80hz.HPF or high pass filter (term in English), means high pass filter, that is, it allows everything above this reference to be reproduced. The common use of this function is to reduce the presence of bass in door speakers, for example. • Bass boost: 0 ~ 10.5db (50hz).Bass boost is the bass reinforcement for the amplifier's sub channel, that is, an "extra" reinforcement for the bass. • Supply voltage: 9 to 16v.It is the operating indication of the amplifier where it will have the minimum and maximum voltage for its operation, outside of this specification it will not turn on or activate protection. • Consumption at rest: 1.7a.This is the reference for the consumption of the amplifier turned on and without music. • Maximum musical consumption: @12.6vdc: 143.5a.This is the estimated consumption of the amplifier working at the minimum impedance playing music at maximum volume. • Maximum consumption in sinusoidal signal: @12.6vdc: 287a.Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply. • Protection system: output short/high/low supply voltage/thermal protection.This system exists to protect the operation of the amplifier. It can be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems.This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier heats up above normal. • Dimensions: width 22.9cm x height 6.5cm x depth 18.6cm.Extreme product dimensions.• Weight: 2.5kg.Gross weight of the amplifier. Technical specifications:TS 400X4 • Operation class: class d.It is the indication of the construction of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, it allows a small, efficient amplifier with reduced heating compared to other construction classes . • Number of channels: 4.Number of channels to use in your project. With this specific model, you have the option of connecting with 4, 3 and 2 channels. • Power @13.8V – 2 ohms, stereo: 4 x 100w rms.The power, with a voltage of 13.8 volts, is related to the operation of the vehicle/power source. • Power @13.8v – 4 ohms, bridge: 2 x 200w rms.The power, with a voltage of 13.8 volts, is related to the operation of the vehicle/power source. • Minimum stereo output impedance: 2 ohms.Association with the speaker result, where, for example, we can connect two 4 ohm speakers per channel for this result. • Minimum bridge output impedance: 4 ohms.Association with the result of speakers, where, for example, we can connect two 8 ohm speakers per channel (bridge) or just one 4 ohm speaker for this result. • Minimum RCA input sensitivity: 200mV.Lower voltage required for maximum results with the amplifier, that is, with low volume on the radio, we will achieve good results. • Frequency response: (full range): 18hz to 30khz (-3db).With the frequency response, it is possible to identify the application of the amplifier, as well as the speaker or any other type of transducer you are using is understood within this response, meaning that we can use this product in your project. • Low pass crossover. (LPF) fixed: 90hz.Lpf or low pass filter (term in English) means low pass filter, that is, it allows everything below this reference to be reproduced and anything above this indication will not be used. A common use of this function is to reduce the presence of voice in subwoofers. • Fixed high pass crossover (hpf): 90hz.HPF or high pass filter (term in English), means high pass filter, that is, it allows everything above this reference to be reproduced. The common use of this function is to reduce the presence of bass in door speakers, for example. • Supply voltage: 8 to 16v.It is the operating indication of the amplifier where it will have the minimum and maximum voltage for its operation, outside of this specification it will not turn on or activate protection. • Consumption at rest: 0.8a.This is the reference for the consumption of the amplifier turned on and without music. • Maximum musical consumption: @13.8vdc: 16.5a.This is the estimated consumption of the amplifier working at minimum impedance, playing music at maximum volume. • Maximum consumption in sinusoidal signal: @13.8vdc: 33a.Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply. • Protection system: thermal and output short.This system exists to protect the operation of the amplifier. It can be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems.This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier heats up above normal. • Dimensions: width 13.8cm X height 4.9cm X depth 12.1 cm.Extreme product dimensions. • Weight: 600 grams.Gross weight of the amplifier. We will reciprocate positive feedback for a successful transaction. If you are happy with our service, please leave us feedback. WARNING:Shipping: Shipment of the product in 1 to 4 business days, shipments are by UPS or Fedex, as soon as the contracted service picks up the product, the tracking number is given to you. Please do on ebay.If UPS or Fedex cannot find the buyer at home and the product is returned, we will not refund the shipping cost, we will deduct a 20% fee from the product value for store administrative costs. Stay tuned for tracking number updatesnot charge tracking number if you purchased on Friday night, Saturday and Sunday, we ship products during business hours.Please check your shipping address if it is correct on Ebay, we are not responsible for incorrect addresses, you are responsible for the address you write We are not responsible for the customs fees charged by your country, each country has its own law, please study the laws before purchase. Orders outside the United States For buyers located outside of the United States, additional fees and taxes may be collected at your destination in accordance with your country's rules. For more information, consult FEDEX and UPS carriers or CUSTOMS in your country before purchasing. WE ARE NOT RESPONSIBLE FOR CUSTOMS FEES CHARGED BY YOUR COUNTRY

Price: 242 USD

Location: sao paulo

End Time: 2024-09-22T03:10:48.000Z

Shipping Cost: 0 USD

Product Images

TARAMPS - HD3000 2ohms 1 Channel + TS400x4  2ohms 4 channel  Amplifier Car AudioTARAMPS - HD3000 2ohms 1 Channel + TS400x4  2ohms 4 channel  Amplifier Car AudioTARAMPS - HD3000 2ohms 1 Channel + TS400x4  2ohms 4 channel  Amplifier Car AudioTARAMPS - HD3000 2ohms 1 Channel + TS400x4  2ohms 4 channel  Amplifier Car AudioTARAMPS - HD3000 2ohms 1 Channel + TS400x4  2ohms 4 channel  Amplifier Car AudioTARAMPS - HD3000 2ohms 1 Channel + TS400x4  2ohms 4 channel  Amplifier Car Audio

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Brand: Taramp's

Model: HD3000.1 2ohms + TS400x4 2ohms

MPN: NAO SE APLICA

Country/Region of Manufacture: Brazil

RMS Power: 3000W

Channels: Mono

Recommended

TARAMPS SMART3 BASS AMPLIFIER 1~2 OHMS 3000W RMS - SAME DAY SHIPPING USA DEALER
TARAMPS SMART3 BASS AMPLIFIER 1~2 OHMS 3000W RMS - SAME DAY SHIPPING USA DEALER

$253.99

View Details
Taramps HD 3000 4 Ohms 1 Channel 3000 Watts RMS MAX Full Range Car Audio Amp
Taramps HD 3000 4 Ohms 1 Channel 3000 Watts RMS MAX Full Range Car Audio Amp

$199.00

View Details
Taramps HD 3000 2 Ohms 1 Channel 3000 Watts RMS MAX Full Range Car Amplifier
Taramps HD 3000 2 Ohms 1 Channel 3000 Watts RMS MAX Full Range Car Amplifier

$199.00

View Details
Taramps TS 800X4 CHANNEL 2 OHMS CAR AMPLIFIER - FREE SHIPPING
Taramps TS 800X4 CHANNEL 2 OHMS CAR AMPLIFIER - FREE SHIPPING

$109.00

View Details
TARAMPS CRX 5 PLUS CROSSOVER - USA DEALER - SAME DAY SHIPPING
TARAMPS CRX 5 PLUS CROSSOVER - USA DEALER - SAME DAY SHIPPING

$89.99

View Details
Taramps The Big Boss 8 Bass 0.5~2 Ohms 8000W RMS + DS 1200x4 2 Ohms + Bass Knob
Taramps The Big Boss 8 Bass 0.5~2 Ohms 8000W RMS + DS 1200x4 2 Ohms + Bass Knob

$609.99

View Details
Amplificador Taramps MD 5000.1 500W 1 Ohm Full Range Mono Car Amplifier  1ohms
Amplificador Taramps MD 5000.1 500W 1 Ohm Full Range Mono Car Amplifier 1ohms

$326.00

View Details
Taramps T 12.000 Chipeo 2 Ohms 12000 watts RMS amplifier NEW RELEASE!!
Taramps T 12.000 Chipeo 2 Ohms 12000 watts RMS amplifier NEW RELEASE!!

$614.99

View Details
Taramps DS 800x4 800 watts 1 Ohms Amplifier Class D 4 Channel Car Audio Amp
Taramps DS 800x4 800 watts 1 Ohms Amplifier Class D 4 Channel Car Audio Amp

$138.00

View Details
Taramps TS 400x4 400 watts RMS 4 Channels Full Range Car Audio Amplifier
Taramps TS 400x4 400 watts RMS 4 Channels Full Range Car Audio Amplifier

$79.00

View Details