Universal OBD Power Cable for Dash ,24 hours Surveillance/ACC mode with switc...

Description: Package:1PCS OBD2 Power Cable Spec: ACC mode Input: 13V-36V | Output: 5V/2.1A Surveillance mode Input: 11.6V-36V | Output: 5V/2.1A Extension cable: 3.5meter (11.5 ft) length Interface: Micro-USB Working Mode: Mode “O”: ACC mode, when your car ACC is off, the OBD power cable will also power off after 5 minutes. Mode “— ”: Surveillance mode, when you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage),it will power off after 30 seconds. The low voltage protection for mode “—” protect your car from running out the battery, enable you have enough voltage to start the car for next driving. Attention: 1.If you leave your car for many days no driving without surveillance purpose, we suggest you to set the working mode in ACC mode “O”.Cars battery will run out day by day because your dashcamera are consuming power all the time in surveillance mode “-”. 2.If the working mode is not switching properly in some vehicels,please unplug and plug the cable from the OBD port then restart the car again. 3.Some dash cam has its own power supply mechanism which may not work with our cable.If you are not sure whether you can use our cable,please us first before you buy. Below is the incompatible brand which has been reported: Viofo Dashcam A119 and A129,Viofo A129 Plus Duo,Viofo Dual Dash Cam (A129 Plus) Garmin dashcam,Garmin 66W dashcam,Garmin dash cam mini 2 Aukey DR02 Vantop H610 Ring Car Cam 70mai dash cam Transcend Dp550 Dashcam Nextbase 622 Dashcam Road Angel Wolfbox Rexing V1 series and others Designed to free up your cigarette lighter socket and supply a 24 hours continuous power to your dash via OBD connection, enable your dashcam to keep working on after you have parked the car. Dual working mode switch button integrated for your convenience: 1.ACC working mode,5 minutes off when your car ACC is off; 2. Surveillance working mode, keep working until it detects low battery voltage(11.6V). Obtaining power from ODB interface only, no interference in other ODB data communication. This cable can be used in dash cams which with MICRO USB PORT ONLY,check your dash cams interface carefully before buying!Cable length:3.5meter(11.5 ft),Input: 8V-36V | Output: 5V/2.1A. Note:1.If the working mode is not switching properly in some vehicels,please unplug and plug the cable from the OBD port then restart the car again;2.For some dashcams our cable may not work properly with them, please refer to incompatible brand list in the product description.

Price: 22.31 USD

Location: Birmingham, Alabama

End Time: 2025-01-13T08:57:44.000Z

Shipping Cost: 0 USD