VOLVO PENTA Outdrive Trim Cylinder/Ram Rebuild Kit DP-E290 DPE290 FULL SEAL KIT

Description: VOLVO Penta Outdrive leg Trim Cylinder Rebuild Kit (to suit two hydraulic pistons) No requirement to remove the cylinders from transom saving a small fortune in time and labour costs No requirement to purchase new cylinder costing £600 for EACH new cylinder PLUS FITTING !!! THIS KIT IS COMPRISED OF UK SOURCED HIGH QUALITY COMPONENTS AND WILL GET YOU BACK ON THE WATER - NORMALLY IN LESS THAN 1 HOUR.The Bi-Directional seals are NOW included in the seal KIT, these prevent the trim cylinders from drifting from their set position, as these seals used to prevent leakage across both sides of the cylinder under different levels of pressureOn Purchase I can also send you a link to my video of how to install the rod seals quickly and successfully. I have put together a video of installing the rod seal which can be a little tricky to install if you are doing this for the first time. As you can see each one should take less than 5 minutes to fit once you know how to do it. Please see the installation video which I will supply the link by email upon seal kit purchase.The supplied kit will fully rebuild two cylindersCan be used on the DPE DPX 290 TYPE drive cylinders for the AQ series 3860881, 854695, 872837 and many others listed below with the round aluminium cap as shown in the picture. Volvo Penta Trimming cylinder 872837 superceded now3860881 854695 superceded now3860881 3860881current Sealing kit will fit Volvo Penta Trim cylinders on the following drives DPX-A DPX-A DPX-A DP-C1 DP-C1 DP-C1 DP-C1 1.95DP-C1 1,95DP-C1 195 DP-C1 2.30DP-C1 2,30DP-C1 230 DP-D1DP-D1DP-D1 DP-D1 1.68DP-D1 1,68DP-D1 168 DP-D1 1.78DP-D1 1,78DP-D1 178 DP-D1 1.95DP-D1 1,95DP-D1 195 DP-D1 2.30DP-D1 2,30DP-D1 230 DP-EDP-EDP-E DP-G DP-G DP-G DP-SDP-SDP-S DPX-CDPX-CDPX-C DPX-R DPX-R DPX-R DPX-R 1.47DPX-R 1,47DPX-R 147 DPX-R 1.51DPX-R 1,51DPX-R 151 DPX-R 1.59DPX-R 1,59DPX-R 159 DPX-R 1.68DPX-R 1,68DPX-R 168 DPX-R 1.78DPX-R 1,78DPX-R 178 DPX-S 1.59 DPX-S 1,59 DPX-S 159 DPX-S 1.68DPX-S 1,68DPX-S 168 DPX-S 1.78DPX-S 1,78DPX-S 178 DPX-S1 1.59DPX-S1 1,59DPX-S1 159 DPX-S1 1.68DPX-S1 1,68DPX-S1 168 DPX-S1 1.78DPX-S1 1,78DPX-S1 178 SP-E SP-E SP-E ****Please note just to be totally clear and in order that you are not unhappy with your purchase that the stainless steel piston rams are not included in this kit.********As of November 2020 these Stainless Steel Pistons/RAMS are now available please email me for further information**** This kit in will not fit earlier Volvo square capped cylinders which are also shown in the picture This kit will repair both hydraulic pistons on the boat the kit consists of Cylinder Cap Wiper Seals: 2 hydraulic rod seals : 2 Outer cylinder cap o-ring: 2 Inner cylinder cap o-ring 2 Piston rod o-ring: 2 Bi-Directional polyurethane composite two part piston seal 2 I have developed this kit as a result of needing these parts myself and as Volvo are unable to resolve this problem (unless you want to spend hundreds if not thousands of pounds) I have provided this solution. Happy Boating!

Price: 64.5 GBP

Location: Glasgow

End Time: 2024-08-31T17:17:51.000Z

Shipping Cost: 12.53 GBP