Description: Walnut Burl wood veneer 9" x 16" with no backing raw veneer. One piece per price AAA quality grade 1/42" thickness. Burl raw veneer may require some flattening, which is very simple to do and can be done with veneer softener (shown - sold separately). This one is pretty flat. Ships flat in between thick cardboard. All pieces in sequence and matching. Other sizes and backed veneer are available in this wood. Notice corner missing. Will clear 8" x 12" or 7" x 16" when squared and that corner is accounted for. Successful and popular product listing. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” Phenolic backed veneer = 1/16th"-1/25th" How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection
Price: 37.5 USD
Location: Louisville, Kentucky
End Time: 2024-02-14T16:41:05.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Veneer Cut: Rotary Cut
Item Type: Veneer Sheet
Veneer Type: Raw
Model: Walnut Burl wood veneer sequenced flitch AAA grade
Walnut Burl wood veneer sample: Raw flitch unbacked piece figured grain AAA grade
MPN: Does Not Apply
Wood Type: Walnut Burl
Brand: Walnut Burl wood veneer sample raw unbacked sheet
