X10 PRO Wall Transmitter Base Module (XPT-NS) Keypad sold separately

Description: Create a custom X10 wall switch with the X10 PRO Wall Transmitter Base Module. This X10 transmitter installs in a standard single-gang wall box and wires into your powerline. Simply decide how many X10 receivers (1, 2, or 4) you want to control with the switch, and then attach the appropriate keypad faceplate (sold separately). Once installed, you have both local and X10 remote control over your X10 receivers!Combines with any XPT keypad to create a custom X10 switchControls up to four sequential X10 unit codesConnects to Hot and Neutral wiresMounts in a single-gang wall box How It Works The transmitter base can control multiple X10 receivers by running the Unit Number Addresses in sequential order. In other words, if you have the dials on the transmitter base set to House Code B and Unit Code 4, a four-button keypad will control the X10 receivers set to House Code B and Unit Codes 4, 5, 6 and 7. The top button will control Unit Code 4, the next button below will control Unit Code 5, and so on. NOTES:Requires an X10 PRO XPT Series Keypad (sold separately).Due to X10 Product changes, these Transmitter Bases are not compatible with Transmitter Bases sold before July 2007.The X10 PRO Wall Transmitter Base Module is an X10 Wired-In Transmitter A basic X10 system includes a Transmitter and a Receiver – both sold separately. Transmitters are control devices that send X10 signals through your home’s electrical wiring to X10 Receivers. When a Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.Technical DetailsMPN: XPT-NSUPC: 099081510010Power Supply: 120VAC at 60HzBattery Backup: One 9V battery (not included)Consumption: 3 WattsColor: White

Price: 35.7 USD

Location: San Diego, California

End Time: 2024-11-03T17:19:36.000Z

Shipping Cost: N/A USD