XTOOL IK618 IMMO Key Programming All System Bi-directional Diagnostic Scan Tool

Description: XTOOL IK618 Automotive All System Diagnostic Scanner Features and Configuration Advanced IMMO Keys & Key Chip Programming: Read PIN, add new keys, remote learning, disable lost keys, make dealer key, smart key programming, all keys lost, IMMO Coding/Reset, IMMO Data Backup, IMMO Read & Write, and etc. 30+ Special Functions: 27 Service Options under “Common Services”, plus hundred’s resets & relearns under “Diagnosis” menu, to meet routine maintenance services tasks. Complete Diagnostic Capabilities: Complete capabilities for codes, live data. Bi-Directional Control: Control various car components to perform active tests like EVAP test, idle relearn, and etc. 90+ Vehicle Brands and Models: Works on 90+ US, European and Asian brands to perform diagnostics. Auto VIN & Auto Scan: Automatically detects and decodes the vehicle VIN number for efficient all systems scan. Fast Processor: Equipped with Quad-Core 1.8Ghz processor, 7” 1024*768 screen, Android 5.1 OS for silky smooth operation. Large Memory: 2GB RAM and 32GB ROM to store software and diagnostic data. 5000mAh Battery: Lasts up to 5 hours of continuous use Dual Wifi Frequency: Connects with both 2.4Ghz and 5Ghz WiFi One-Click WiFi Update: Connect to WiFi connection and one-click to update software 2-Year Software Updates: Comes with 2-Year software updates to add new functionalities, incoming features, add newer vehicle coverage and improve software performance. Multi-Lingual Options: Default in English, send us S/N to change to Spanish, French, and etc. XTOOL IK618 Supported OE-Level All Systems Diagnostics The diagnostic application can read ECU information, read and clear DTC check living data and freeze frames. The diagnostic application can access the electronic control unit (ECU) of various vehicle control systems, including the engine, transmission, anti-lock braking system (ABS),airbag system (SRS) and perform kinds of actuation test.Please make sure all the cables are connected tightly; The vehicle's DLC is not always located under the dash; for the location of DLC, please refer to the vehicle's user manual. It can scan all available systems to perform diagnostics including: Read Codes: including manufacturer-specific codes, pending codes, permanent codesClear Codes: Clear codes, reset monitors and turn off warning lightsLive Data: Live data stream from various sensors including misfire, engine rpm, transmission fluid temperature and etc.Auto VIN SCAN Freeze Frame: Retrieve parameters when DTC is recorded for better diagnostics.Auto VIN Scan: Scan your car’s detailed version information with one click. You can always navigate your vehicle manually to perform diagnostics if the Auo VIN do not work in some cases. XTOOL IK618 Support Complete OBDII Test> Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)> Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.> Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.> I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.> Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.> View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.> O² Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.> On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.> Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.> Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability. Professional Vehicles IMMO & Key Programming The key programming software inside IK618 app can get access to the immobilizer system inside the vehicles and supports multiple functions like key programming, generate dealer key, all key lost, immobilizer reset or changing, EEPROM chip coding and much more. For different manufacturers, the menu inside each software and support functions will be different. We suggest checking the support list with customer services by ebay message. XTOOL IK618 can perform pro-level key programming and IMMO functions as below: Read PINAdd Transponder/Smart Key/Remote Learning, Disable Lost KeysMake Dealer KeyKey Learning for BMW CAS4/3/2/1Key Programming for VW, for Audi, for Skoda, for Seat, for Bentley, for 4th,5th, MQB IMMOIMMO Reset/CodingIMMO Data Backup/RestoreRead & Write Key ChipsRead & Write EEPROMDetect Remote Frequency Support More Than 30+ Special Reset Services XTOOL IK618 Automotive Diagnostic Scan Tool comes with 27 stand-alone service options under “Common Service” and various resets, relearns, adaptations, matchings, initializations, calibrations under “Diagnosis” menu. Oil Reset: Perform reset for a new calculation of engine oil life system once changed the oil.EPB Reset: Maintain the electronic braking system safely and effectively.SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.DPF: Clear the blockage via the continuous burning of the particulate matter captured in the filter.Battery Replacement: Register the newly replaced car battery into the computer.Injector Coding: Code the new injectors after replacement for accurate fuel injecting control.ABS Bleeding: Bleed the air out of the ABS system for firm brake pedals.EEPROM Adapter: Read EEPROM data when OBD method is not available. Other service options includes Throttle Relearn, Gearbox Match, Suspension Calibration, Key Programming, Headlight, Window Reset, Seat Match/Configurations, Tire Refit, Crankshaft Position Variation Learn, Airbag Reset, Disable Transport Mode, Electronic Pump Activation and etc. Note: Service & Resets do NOT FOR all vehicles. Please come to us with car model and year to check compatibility before purchase. Bi-Directional Control (Actuation Test) This IK618 auto diagnostic scanner is a bi-directional scanner that can control various car components and subsystems like A/C Clutch, Fuel Injectors, ABS Pump Motor, Solenoid Valves, Relays, Interior Lighting, Window, Door, Sunroof, Car Wipers, to perform various vehicle-specific active tests (or actuation tests, component tests) to test the integrity of components and locate fault causes much more efficiently and accurate. XTOOL IK618 Hardware Parameter and Configuration Operating System: AndroidCPU: Quad-core 1.6GhzMemory: 2GB RAM + 32GB ROMDisplay: 7-inch 1024×600 resolutionConnectivity: USB/WIFI/DB15(VAG)Sensor: Gravity Sensor, Light SensorAuto Input/Output: Microphone, Dual speakersPowered: 5,000mAh, 7.4V Lithium-polymer BatteryVoltage: 5VPower Consumption: 8WOperating Temperature: -20℃~60℃ (-4℉~140℉)Storage Temperature: -40℃~70℃ (-40℉~158℉)Humidity: ＜90%Dimension: 249×142×33.5 mm On Aug 9, 2023 at 04:06:42 PDT, seller added the following information:

Price: 836.28 USD

Location: Hongkong

End Time: 2023-12-10T10:36:28.000Z

Shipping Cost: 0 USD

Product Images

XTOOL IK618 IMMO Key Programming All System Bi-directional Diagnostic Scan Tool

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Manufacturer Part Number: IK618

OBD Interface: OBDII, OBD, EOBD, CAN

Connectivity: USB

Supported System: TPMS, SRS, SAS, EPB, ABS

Vehicle Type: Passenger Vehicle

Accessories: Adapter Cable, Carrying Case, User Guide, USB Cable

Features: User Friendly, Multi-Language Interface, LCD Display, Internet Updateable, Freeze Frame Displays, Erases Codes, Color Display, Check Engine Light Shut Off

Warranty: 2 Year

Applicable Regions: World Wide

Country/Region of Manufacture: China

Multi-Languages 1: English, Spanish, German, French, Italian,

Multi-Languages 2: Finnish, Arabic, Japanese, Korean, Polish

Multi-Languages 3: Portuguese, Vietnamese, Russian

Compatible Protocol: SAE-J1850,ISO-14230,ISO-9141,ISO-15765,CANBUS,ect.

All System Diagnostic: Engine System, Drive System, Chassis System, Body System

Complete OBDII Function: Read/Clear Codes, Live Data, Freeze Frame, Component Test, ect.

Operating System: Android 5.1.1

Processor: Quad-core 1.6GHz

Storage: 2G RAM + 32G ROM